HD-TVI/ AHD/ HDCVI/ CVBS Transmission
  • 16 x RJ45 connector for video input + power output + data output.
  • 4 x RJ45 connector for video output, 4 x 8 pin terminal for power input, 1 x 2 pin terminal for data input.
  • Built in surge protection on data signal.
  • 16 cameras cable termination panel, use for integrating power, video and data signals onto 4 x RJ45 4 pairs UTP cable.
  • Individual power input, could send different power voltage based on camera power consumption and transmission range.
  • Use with STP111VPD-RJ45 video, power, data transceiver at the camera side.
  • Use any third-party power supply to power cameras via UTP over (See below “power distance chart”).
  • Use with STP016-RJ45 as video transceiver receiver at control room.
  • Perfect cable management solution from the camera to the wiring station, control room.
Video Input RJ45 x 16 (7.8 pin)
Video Output BNC x 16 (1 Vp-p,75 Ohm)
Ppwer Input 8 pin removal terminal x 4
Power Output RJ45 (pin 4.6 +,3.5 -)
DATA Signal Input 2 pin removal terminal x 1
DATA Signal Output RJ45 x 16 (1.2 pin)
Recommend Cable CAT5 UTP (24 AWG)
Temperature Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: $up to 95%
Dimensions W x H x D mm 483 x 99.2 x 44 (1U)
Weight g 1105